The STICK range has been designed to offer the perfect lighting control solution for any environment. DMX data messages are sent directly from the STICK to a DMX compatible power supply (sometimes called a «DMX Driver»).
The STICK range has been designed to offer the perfect lighting control solution for any environment. DMX data messages are sent directly from the STICK to a DMX compatible power supply (sometimes called a «DMX Driver»). The power supply listens to the DMX messages and supplies the power to the lighting fixture. For example, an LED strip may use a 12V DMX power supply. The DMX messages are then passed on to the next lighting fixture or DMX driver.
Mount the back side of the interface on the wall with 2 or more screws.
DMX and power (connector block or RJ45)
Ethernet cable if needed
Press against the back plate and then slide down
Use 2 screws to hold the controller
The STICK range has been designed to offer the perfect lighting control solution for any environment. DMX data messages are sent directly from the STICK to a DMX compatible power supply (sometimes called a «DMX Driver»).
The STICK range has been designed to offer the perfect lighting control solution for any environment. DMX data messages are sent directly from the STICK to a DMX compatible power supply (sometimes called a «DMX Driver»).
The STICK range has been designed to offer the perfect lighting control solution for any environment. DMX data messages are sent directly from the STICK to a DMX compatible power supply (sometimes called a «DMX Driver»).