ハードウェア

Infra Red Triggering

The USB-SD interface can be triggered by any 36Khz remote control. To pair a remote control key to a scene:

1. Hold down the "+" button and button 3 whilst powering up the interface
2. The interface display will then scroll through the scenes. When you see the scene you wish to trigger, simply press the trigger key on the remote control

Example

To program Scene 4 to be triggered by button 4 on a remote control...

1. Hold down the "+" button and button 3 whilst powering up the interface
2. Wait until 4 is displayed, then press button 4 on the remote control

You can also assign a button to trigger the next/previous scene or page by selecting P+,P-,S+ or S-

If you are using the official IR remote control. Simply open up the hardware tools and select the button to send the remote configuration file

ハードウェア