Sunlite Suite
Using the USB interfaces
Sunlite can operate up to 10 USB-DMX interfaces simultaneously. Then, it is possible to run 10 DMX universes with single output interfaces and 20 universes with new IN/OUT interfaces. We will see later how to convert the DMX IN connector of your interface in a second DMX output.
You must open the "Starting parameters" window and the "Output" tab to setup the universes. You will have to select "USB-DMX" for all universes you want to control with your interfaces.
Do not forget that if a universe is not correctly assigned to a output hardware, you might not be able to control your lights with it.
Use of the DMX IN connector as a second output
It is possible to convert the Input connector of your interface in a second output. To do that, you must open the "Starting parameters" window and the "Output" tab. Then, imagine you want to use the software universes #1 and #2 with your USB interface, you will have to select "USB-DMX" for the 1st universe and then check the box located on the right side of the list. You can now select "USB-DMX (- Out2)" for the universe #2.
Do not forget to purchase or make a female to female XLR converter to connect your lights.
