- Preface
- Hardware Tools
- General information on DMX interfaces
- SIUDI 1 (2000 USB interfaces)
- SIUDI 1bis (2002 USB interfaces)
- SIUDI 2 (2002 low cost USB interfaces)
- SIUDI IP1 (2004 ETHERNET-DMX interface)
- SIUDI 5 (2006 USB interfaces)
- SIUDI 6 (2006 low cost USB interfaces)
- SIUDI 7 (2009 USB-SD interfaces)
- SIUDI 8 (2010 USB interfaces)
- SIUDI 9 (2011 low cost USB interfaces)
- STICK 1 (2009 Touch-sensitive keypad)
- STICK 2 (2011 low cost glass keypad)
- STICK 3 (2012 palet/display glass keypad)
- Other connections
- Frequency Asked Questions (FAQS)
Hardware
0-10V relay (output)
If you need to control external devices which do not accept the DMX signal, the best solution is to convert the DMX signal with DMX -> 0-10V or DMX -> RELAY interfaces. You can also use dimmer packs which are generally used to connect traditionnal lighting.
DMX - Relays - 0-10V interfaces:
