Hardware

Hardware

Touch-Sensitive Buttons

The STICK has 8 touch sensitive buttons. To trigger a scene, simply touch the button.

Button Properties

You can modify button properties on the parameters tab within the hardware tools.

1.    PAUSE: The time you must hold your finger on a button to pause a scene
2.    STOP: The time you must hold your finger on a button to stop a scene
3.    RESET: The time the STICK will wait before acknowledging a new command

In the example below, if you hold your finger on an activated scene for 0.3 seconds, the scene will pause and the LED will flash. If you hold your finger on the button for a further 1 second, the scene will be stopped. The STICK will then wait a further 0.3seconds before allowing you to perform another action.

Double clicking a scene will disable any dimmer/speed/color modifications.

Note: if you have a reset time too low, the STICK will not be able to detect double clicks.

You can also disable certain buttons on the STICK such as the dimmer/speed/color fader.

Copyright © 2013 ~ Nicolaudie. All rights reserved.