Langage :
EnglishFrenchSpainChineseJapanese

Hardware

Manual
Top > Hardware > SIUDI 9 (2011 low cost USB interfaces) > Recall
Next
Previous

Hardware

Recall

Recall 3 feb 2011

We have just found a hardware problem with ports triggering. Ports #3 and #4 could not work on SIUDI9 interfaces with s/n between 350001 and 355000.

There is a quick solution to fix the problem: 2 resistors (10kΩ) must be added as shown on the picture below.

There is no need to do this modification if ports triggering are not used.




Copyright © 2013 ~ Nicolaudie. All rights reserved.