Sunlite Suite 2
EasyTime and EasyStep sequences can be triggered by audio.
1. Click here to enable audio in an EasyStep sequence
2. Click here to enable audio in an EasyTime sequence
Notice that the timeline values change to music notes. These can be dragged to change where the playhead will jump on each beat.
The audio analysis is a tool which sends a pulse to any audio enabled EasyStep or EasyTime sequence. The audio analysis works in 4 different modes:
Manual: Choose a manual BPM from the combo box
Tap: Tap out a BPM by pressing the tap button
Audio Analysis: Calculates a BPM from an incoming audio signal. By default, the threshold is set automatically, check "Manual" to set the threshold yourself appropriate to the style of music
BPM by Midi Clock: Detects a midi clock signal sent from high end DJ software and DJ mixers. Note that you will need to select a midi device from the Software Preferences first
BPM by Midi clock is usually the most accurate form of BPM detection because DJ software will anylise the BPM from the audio file before it is played.
Note: if you cannot see an audio input when using the audio analysis, make sure the correct recording input is selected on the "Audio settings" tab. Also check that the correct input is set up in the windows control panel->sound. Adjust the Gain dial to increase the input signal.