Sunlite Suite 2
Editing a scene with EasyStep
1. Turn your lamps on
SCENES and SWITCHES can be edited using the EasyStep tool or the EasyTime tool. In this chapter, we will create a simple movement using the EasyStep tool. Click the beam open icon to automatically activate the shutter, iris and dimmer channels. Create a new scene, make sure “As you see now” is selected and select “OK + Edit”.
2. Select fixtures to edit
Select the fixtures you wish to control here(1). Presets can be modified here(2).
3. Assign EasyStep mode to the relevant channels
Each channels mode can be set here. All channels are set to off by default. To make a simple movement pattern, assign the EasyStep tool to the pan and tilt channels. Drag the EasyStep icon here and hold ctrl to select multiple channels.
4. Adjust fixtures
In addition to the preset tab, you can also adjust your fixtures using the faders tab. Move the X and Y faders to position the fixtures.
5. Create a new step and preview
Once the parameters have been adjusted, click here(1) to create a new step. Move the X and Y faders to the second position. EasyStep sequences can be previewed by clicking here(2).
6. Add fade/wait times
Fade and wait times can be added by double clicking a step or by clicking the clock icon.
