Sunlite Suite 2
Software & Hardware Installation
You must install the software first, then install the hardware second.
Insert the Sunlite installation CD into the CD drive of the computer. Wait for the software installation to begin automatically. If you've downloaded the software from our website, double click the setup icon.
Follow the on-screen instructions to install the software. The DMX interface USB drivers will be installed during the software installation. When the windows driver installation dialog appears, click next. If a dialog appears to say that the drivers are not digitally signed, select "Continue Anyway".
Once the software installation is complete, connect your interface to the USB socket. The second set of drivers will be installed and a notification will be shown on the taskbar once the installation is complete. Do not start the software until the driver installation is finished, otherwise your device will not be detected.
Connect the Male (3/5 pins) end of the XLR cable into the Sunlite Suite 2 DMX interface and connect the female (3/5 holes) end of the XLR into your first fixture.