Dear Mr.,
The STICK-KE1 DMX Channel was insufficient for our needs. We will need 2992 Channel and stand alone operation for outdoor show .
Could you assist how I extend the STICK-KE1 DMX Channel via ESA Pro ?
Best Regards,
Albert Chen
STICK-KE1 DMX Channel not enough
Moderators: simonB, nick, RichterMC, florent, Ben
Re: STICK-KE1 DMX Channel not enough
Hi Albert
The KU1 supports a maximum of 1024 channels. It's possible to synchronise KE1's over a network, however the maximum channel count across all KE1's is always 1024. To access 2992 channels, you'll need to use 3 SLESA-UE7's connected to a router or switch.
The KU1 supports a maximum of 1024 channels. It's possible to synchronise KE1's over a network, however the maximum channel count across all KE1's is always 1024. To access 2992 channels, you'll need to use 3 SLESA-UE7's connected to a router or switch.
Simon
--
Sales/Support
--
Sales/Support
Re: STICK-KE1 DMX Channel not enough
Dear Mr.,
I still have some question, please kindly advise.
1.After I set 3 SLESA-UE7 scene via ESA pro, SLESA-UE7 still connect the computer via Ethernet ?
2.All of 2992 channels can apply for individual control ?
Best Regards,
Albert Chen
I still have some question, please kindly advise.
1.After I set 3 SLESA-UE7 scene via ESA pro, SLESA-UE7 still connect the computer via Ethernet ?
2.All of 2992 channels can apply for individual control ?
Best Regards,
Albert Chen
Re: STICK-KE1 DMX Channel not enough
Hi Albert
This will work in stand alone (in fact it doesn't work in LIVE yet). You can set one of the UE7's as a master and the others as slaves.
Yes, all 2992 channels can be controlled independently with this method.
This is a brand new feature which requires a new beta version of ESAPro and a new firmware which we will be putting up next week.
This will work in stand alone (in fact it doesn't work in LIVE yet). You can set one of the UE7's as a master and the others as slaves.
Yes, all 2992 channels can be controlled independently with this method.
This is a brand new feature which requires a new beta version of ESAPro and a new firmware which we will be putting up next week.
Simon
--
Sales/Support
--
Sales/Support